May 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed May 5 20:17:18 UTC 2010
Ending: Fri May 28 19:28:22 UTC 2010
Messages: 90

• [Yum-devel] [PATCH 1/3] Fix deselections like '-*debuginfo' etc.   James Antill
• [Yum-devel] [PATCH 2/3] Move the rpmdb cache to yum persistent storage.   James Antill
• [Yum-devel] [PATCH 3/3] Revert " Work around mock setting mtime on var/lib/Packages, for it's "caches"."   James Antill
• [Yum-devel] [PATCH] Don't do rpmdb checks, in version, with no history (as it's root only now).   James Antill
• [Yum-devel] [PATCH] Only do any rpmdbv checks, if history_record is set   James Antill
• [Yum-devel] [PATCH] Show which repos. were cleaned, in yum clean XYZ   James Antill
• [Yum-devel] [PATCH] add --enablerepo to suggestion for handling package not matching what is expected to be downloaded. deals with folks installing debuginfo pkgs but not have debug repos enabled when they run clean metadata   James Antill
• [Yum-devel] [PATCH 2/2] output list of repos being cleaned up for when we clean.   James Antill
• [Yum-devel] History DB version 2, ready to go in ... I think   James Antill
• [Yum-devel] [PATCH 1/9] Add skip broken packages to history transaction.   James Antill
• [Yum-devel] [PATCH 2/9] Add three views to make look at history by hand easier   James Antill
• [Yum-devel] [PATCH 3/9] Add rpmdb problems, and cmdline to the history DBv2 update   James Antill
• [Yum-devel] [PATCH 4/9] Save rpmdb problems, and cmdline, into yum history   James Antill
• [Yum-devel] [PATCH 5/9] Output cmdline and rpmdb problems in history info   James Antill
• [Yum-devel] [PATCH 6/9] Move obsoleted.obsoleter check into the correct problem loop   James Antill
• [Yum-devel] [PATCH 7/9] Mark pre-exsting rpmdb problems in history list, with 'P'.   James Antill
• [Yum-devel] [PATCH 8/9] Fix sorting of historic rpmdb problems   James Antill
• [Yum-devel] [PATCH 9/9] Save, and then Highlight, the "main" package which has a problem   James Antill
• [Yum-devel] [PATCH 3/9] Add rpmdb problems, and cmdline to the history DBv2 update   James Antill
• [Yum-devel] [PATCH 1/3] Add a couple of depsolve tests, from a bug I found updating F-13.   James Antill
• [Yum-devel] [PATCH 2/3] Add a fix for the _old_ bug, and a comment about another possible fix.   James Antill
• [Yum-devel] [PATCH 3/3] Do the second fix, for the previous testcase. Seems correct, but not 100%.   James Antill
• [Yum-devel] [PATCH] Remove "No transaction set" error, for YumLocalPackage   James Antill
• [Yum-devel] [PATCH] oddball case where rpm coughed up an EMPTY provides entry.   James Antill
• [Yum-devel] [PATCH] oddball case where rpm coughed up an EMPTY provides entry.   James Antill
• [Yum-devel] [PATCH] Filter empty provides/etc. in the non-pritable case too.   James Antill
• [Yum-devel] [PATCH] Be more paranoid about saving the rpmdb version, it's possible PK could be doing somethign weird here ... like loading data, hanging around as user does something in yum (which alters the rpmdb) and then somehow PK saves the rpmdb version. I can't see how it's possible though, but two extra stats. for a little more paranoia doesn't seem out of place.   James Antill
• [Yum-devel] [PATCH] Handle obsoleting pkgs. which are excluded after obsoleted_dict setup   James Antill
• [Yum-devel] [PATCH] Fix for obsoleting pkgs. we are trying to install   James Antill
• [Yum-devel] Hopefully all the "install blah" obs. test/fixes ... hahahaha   James Antill
• [Yum-devel] [PATCH 1/3] Fix for obsoleting pkgs. we are trying to install   James Antill
• [Yum-devel] [PATCH 2/3] Now do the same testcase for noarch => multilib   James Antill
• [Yum-devel] [PATCH 3/3] Fix obsoleting pkgs. from <install norach> to multilib. using archdistance   James Antill
• [Yum-devel] [PATCH] Make "blah in ipkg.yumdb_info" be quicker, and fail in more useful ways   James Antill
• [Yum-devel] Fix versionlock with follow obsoletes, etc.   James Antill
• [Yum-devel] [PATCH] Fix adding pkgExcluders after a package has been loaded. versionlock, at least   James Antill
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   James Antill
• [Yum-devel] [PATCH] Dump False and 0 as their values, and not the empty string   James Antill
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   James Antill
• [Yum-devel] [PATCH] Add --setopt to YumUtilBase commands   James Antill
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   James Antill
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   James Antill
• [Yum-devel] [PATCH 2/2] - go through all of our code and change our decompressors to use misc.decompress() - this should mean we can access metadata compressed using any supported compression library provided it is NAMED accordingly - add fn_only option to misc.decompress() so we can get a returned name w/o actually having the file - useful for finding a decompressed file if we only have the compressed one   James Antill
• [Yum-devel] [PATCH] - cleanup decompress some - keep stub bunzipFile - add lzma support, if available   James Antill
• [Yum-devel] [PATCH 1/9] Add skip broken packages to history transaction.   Tim Lauridsen
• [Yum-devel] [PATCH 2/9] Add three views to make look at history by hand easier   Tim Lauridsen
• [Yum-devel] [PATCH 3/9] Add rpmdb problems, and cmdline to the history DBv2 update   Tim Lauridsen
• [Yum-devel] [PATCH 4/9] Save rpmdb problems, and cmdline, into yum history   Tim Lauridsen
• [Yum-devel] [PATCH 5/9] Output cmdline and rpmdb problems in history info   Tim Lauridsen
• [Yum-devel] [PATCH 6/9] Move obsoleted.obsoleter check into the correct problem loop   Tim Lauridsen
• [Yum-devel] [PATCH 7/9] Mark pre-exsting rpmdb problems in history list, with 'P'.   Tim Lauridsen
• [Yum-devel] [PATCH 9/9] Save, and then Highlight, the "main" package which has a problem   Tim Lauridsen
• [Yum-devel] [PATCH 8/9] Fix sorting of historic rpmdb problems   Tim Lauridsen
• [Yum-devel] [PATCH] Show which repos. were cleaned, in yum clean XYZ   Tim Lauridsen
• [Yum-devel] [PATCH 1/3] Add a couple of depsolve tests, from a bug I found updating F-13.   Tim Lauridsen
• [Yum-devel] [PATCH 2/3] Add a fix for the _old_ bug, and a comment about another possible fix.   Tim Lauridsen
• [Yum-devel] [PATCH 3/3] Do the second fix, for the previous testcase. Seems correct, but not 100%.   Tim Lauridsen
• [Yum-devel] [PATCH] Handle obsoleting pkgs. which are excluded after obsoleted_dict setup   Tim Lauridsen
• [Yum-devel] [PATCH] SKIP-BROKEN: fix issue where the loop detection are triggered because the have been a unchanged transaction earlier in a skip-broken loop, but was solved by hard reseting the transation. It is only a loop if we have a unchanged transaction 2 times in a row (rhbz # 590454)   Tim Lauridsen
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Jeroen van Meeuwen
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Jeroen van Meeuwen
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Jeroen van Meeuwen
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Ville Skyttä
• [Yum-devel] [PATCH] Don't do rpmdb checks, in version, with no history (as it's root only now).   Seth Vidal
• [Yum-devel] [PATCH] Only do any rpmdbv checks, if history_record is set   Seth Vidal
• [Yum-devel] [PATCH 2/3] Move the rpmdb cache to yum persistent storage.   Seth Vidal
• [Yum-devel] [PATCH 3/3] Revert " Work around mock setting mtime on var/lib/Packages, for it's "caches"."   Seth Vidal
• [Yum-devel] [PATCH] add --enablerepo to suggestion for handling package not matching what is expected to be downloaded. deals with folks installing debuginfo pkgs but not have debug repos enabled when they run clean metadata   Seth Vidal
• [Yum-devel] [PATCH 1/2] add --enablerepo to suggestion for handling package not matching what is expected to be downloaded. deals with folks installing debuginfo pkgs but not have debug repos enabled when they run clean metadata   Seth Vidal
• [Yum-devel] [PATCH 2/2] output list of repos being cleaned up for when we clean.   Seth Vidal
• [Yum-devel] [PATCH 2/2] output list of repos being cleaned up for when we clean.   Seth Vidal
• [Yum-devel] [PATCH 1/3] Add a couple of depsolve tests, from a bug I found updating F-13.   Seth Vidal
• [Yum-devel] [PATCH] oddball case where rpm coughed up an EMPTY provides entry.   Seth Vidal
• [Yum-devel] [PATCH] Remove "No transaction set" error, for YumLocalPackage   Seth Vidal
• [Yum-devel] [PATCH] oddball case where rpm coughed up an EMPTY provides entry.   Seth Vidal
• [Yum-devel] [PATCH] oddball case where rpm coughed up an EMPTY provides entry.   Seth Vidal
• [Yum-devel] [PATCH] Filter empty provides/etc. in the non-pritable case too.   Seth Vidal
• [Yum-devel] [PATCH] SKIP-BROKEN: fix issue where the loop detection are triggered because the have been a unchanged transaction earlier in a skip-broken loop, but was solved by hard reseting the transation. It is only a loop if we have a unchanged transaction 2 times in a row (rhbz # 590454)   Seth Vidal
• [Yum-devel] [PATCH] Fix for obsoleting pkgs. we are trying to install   Seth Vidal
• [Yum-devel] Hopefully all the "install blah" obs. test/fixes ... hahahaha   Seth Vidal
• [Yum-devel] [PATCH] Make "blah in ipkg.yumdb_info" be quicker, and fail in more useful ways   Seth Vidal
• [Yum-devel] [PATCH] Dump False and 0 as their values, and not the empty string   Seth Vidal
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Seth Vidal
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Seth Vidal
• [Yum-devel] [PATCH] Add --setopt to YumUtilBase commands   Seth Vidal
• [Yum-devel] [PATCH] Fix blank line at end of all scriptlet output   Seth Vidal
• [Yum-devel] Fix versionlock with follow obsoletes, etc.   Seth Vidal
• [Yum-devel] [PATCH] - cleanup decompress some - keep stub bunzipFile - add lzma support, if available   Seth Vidal
• [Yum-devel] [PATCH 2/2] - go through all of our code and change our decompressors to use misc.decompress() - this should mean we can access metadata compressed using any supported compression library provided it is NAMED accordingly - add fn_only option to misc.decompress() so we can get a returned name w/o actually having the file - useful for finding a decompressed file if we only have the compressed one   Seth Vidal
• [Yum-devel] random todos   seth vidal

Last message date: Fri May 28 19:28:22 UTC 2010
Archived on: Fri May 28 19:27:45 UTC 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...